Water temperature control units circulate temperature stabilized water through the process for process temperature control.
A pump circulates water through the process. A heater and a cooling valve work together to control the water temperature.
This temperature control unit requires a plant water supply source.
Temperature control units are portable, built on casters to easily move the unit between processes.
Specifications
VT-4100-LXG-300 (1)
Heater (2)
kW : 24
Process Pump
HP : 1
GPM : 45
PSI : 30
Full Load Amperage (3)
230/3/60 : 62.2
460/3/60 : 31.1
575/3/60 : 26.0
Connection Sizes
To Process : 1-1/4"
From Process : 1-1/4"
Water Supply : 1/2"
Drain : 1/2"
Dimensions
Height : 44"
Width : 16"
Depth : 24"
Weight (5)
Shipping : 275 lbs
Specification Notes:
1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
2. Derate heater output by 25% for 208/3/60 operation.
3. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring. Not for construction. Consult factory for power requirements of unit as configured and on selected options.
4. Consult factory for 50HZ operation.
5. Unit weight crated for shipment.
Features
Process Pump
1 HP process pump
Stainless steel shaft
Horizontal motor extends bearing and seal life
ODP (open drip proof) motor
Pump seal flush line
Custom designed impeller and casing
High grade mechanical contactor with over current, phase loss and short circuit protection
Cooling Vavle
PVT™ Solenoid Valve
Pulsed by the microprocessor controller
Heater
24 kW
Stainless steel sheath
Built-In flange for bolt-in mounting
Mechanical contactor
Control Instrument
Controls temperature from 30°F to 300°F
LXG-300 Series
Cabinetry & Frame
Stainless steel panels
Hinged electrical cabinet door
Lift-off mechanical cover
Portable, on castors
System Limits
Water supply pressure switch
Process pump motor overload protection
Process pressure relief valve
High temperature limit protection
Control circuit fuse
Electrical
DIN rail mounted electrical components
UL approved components
Nema 1 electrical construction
Pressure Gauges
To process
From process
Heating & Cooling Cylinders
Twin cylinders - separate heating and suction tanks
Made from cast iron by custom molds
Reinforced bosses for process and ancillary connections
NPT process connections
Each cylinder is flanged mounted to the pump casing
Warranties
Lifetime on the pump seal
4 Years on the control instrument
2 Years on the cooling valve
2 Years on the mechanical system
Options
Process Pump
3/4 HP @ 35 GPM Changes Model to VT-4100--LXG-300
1-1/2 HP @ 65 GPM Changes Model to VT-4150--LXG-300
2 HP @ 75 GPM Changes Model to VT-4200--LXG-300
3 HP @ 80 GPM Changes Model to VT-4300--LXG-300
5 HP @ 90 GPM Changes Model to VT-4500--LXG-300
7-1/2 HP @ 100 GPM Changes Model to VT-4750--LXG-300
Heater
10 kW Changes Model to VT-2100--LXG-300
16 kW Changes Model to VT-3100--LXG-300
34 kW Changes Model to VT-5100--LXG-300
Control Instrument
LXT-300 Changes Model to VT-4100-LXT-300
Alarms
High dB Audible Alarm
Visual / audible beacon
Electrical
Power Disconnect Switch
Solid State Heater Contactor
Unit
Total Non-Ferrous Unit
Mold Purge
Dual Zone dolly with water manifold and/or single electrical connection
Stacking Stand with water manifold and/or single electrical connection
Cabinetry & Frame
Rear Panel Cover
Control Instrument
LXG-300
Simple menu driven controller
LCD display
Home screen includes continuous setpoint and to process temperature
% Heating or Cooling indication on home screen
Standard shut down pump seal cooling feature
User configurable automatic start-up venting
Out-of-spec alarm including standard audible signal
Selectable SPI or Modbus RTU communication
Optional Modbus TCP communication
For process fluid temperature up to 300°F
Selectable °F or °C temperature display
Support Documents
Literature
3 pages Color 515 KB
Includes Specifications
Manual
84 pages Color 8.1 MB
Updated on March 30, 2018
Veteran Series Temperature Control Unit with LXT-300 Series Control Instrument
Temptek, Inc. 525 East Stop 18 Road, Greenwood, IN 46142 Phone: 317-887-6352 Fax: 317-881-1277
Product innovation and improvement is our constant goal. All features and specifications are subject to change without notice or liability. Products are
assembled in the United States of America. Site Map