Cooling Tower

• Model: T45P (1)
• Capacity (2)
• Capacity : 45 tons
• Flow Rate : 135 GPM
• Direct Drive Fan
• Quantity : 1
• RPM : 1,170
• CFM : 12,040
• Motor
• Quantity : 1
• HP : 3
• Full Load Amperage (3)
• 230/3/60 : 9.6
• 460/3/60 : 4.8
• 575/3/60 : 3.9
• Connection Sizes (5)
• To Tower : 3"
• From Tower : 4"
• Dimensions
• Height : 138"
• Width : 60"
• Depth : 49"
• Weight
• Dry : 725 lbs
• Operating : lbs
• Shipping : 1,100 lbs

Specification Notes:

1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change with notice or liability. Selection of certain optional features may change listed specifications.
2. Cooling water from 95°F to 85°F at 3 gpm per ton and 78°F web bulb temperature.
3. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring. Not for construction. Consult factory for power requirements of unit as configured and on selected options.
4. Consult factory for 50HZ operation.
5. When used with remote sump consult factory for connection size when the base of the tower will be used as the reservoir.

• Cooling Tower Design
• Single cell design
• Total non-ferrous construction materials
• Single inlet and drain connections
• Counter-flow air movement
• Structural galvanized steel base
• Fan
• Air foil shaped blades for increased air flow
• Blades are made of a glass fiber reinforced polymer
• Blades are factory set at best angle for maximum air movement
• Direct drive mechanics
• Distribution Header
• Non-ferrous PVC 'cross' construction
• Stationary
• Computer designed spray pattern
• Large orifice spray heads
• PVC spray heads
• Drift eliminator prevents over spray and water loss
• Inspection Covers
• Easily removed
• eamless gasket sealing
• Allows for inspection on cell interior and replacement of wet deck
• Inlet Louvers
• Stacked honeycomb pattern maximizes water and air flows for greater cooling efficiency
• PVC construction

• Shell Construction
• High strength fiberglass molding
• 1/2" of structural thickness in reinforced areas
• UV stabilized coating
• Acrylic adhesive bonding between shell halves
• Polyurethane sealant
• Motor
• TEFC construction
• Mounted on a stainless steel frame
• Supported on reinforced fiberglass shell area
• Mounted to shell with stainless steel fasteners
• Inspection Covers
• PVC construction
• Easily removed for cleaning
• Vertical orientation to eliminate water loss
• Directs air flow for even distribution through wet deck
• Helps prevent air-born debris from entering cell
• Wararnty
• 10 year shell warranty
• 5 year motor/fan warranty

• Fan Starter Kit
• Motor start contactor
• Motor overload relay
• Nema 1 enclosure
• Fan thermostat
• Side Outlet
• PVC flange
• Factory installed

• Basin Float Valve
• Mechanical float and valve
• 1/2" supply connection
• Factory or field installed
• 10' Tower Stand
• 10' corner post design with cross bracing
• Ladder and railing attachments

• Literature
• 
• Download
• 240 KB

• Manual
• 
• Download
• 3.0 MB

• TP Series Cooling towers cool recirculated fluids that support industrial process cooling applications.
• Cooling Towers are typically used to supply cooling temperatures between 5°F to 10°F above the ambient wet bulb conditions.
• Cooling Towers provide cooling water to multiple processes, including hydraulics, chiller condensers, temperature control units and other equipment.
• Temptek offers cooling towers in capacities from 45 to 540 tons in single and expanded cell systems.